Kitsound HIVE X - Device Pairing and Audio Input; Bluetooth and NFC Pairing; Playing Music; Auxiliary Input

6 7
Auxiliary
1. Plug the Aux cable into the speaker’s Aux-in port (10) and your device
2. The LED indicator (6) will become a solid red colour
Once connected to the Hive X either wired or by Bluetooth, please follow the below instructions:
Function Bluetooth mode Auxiliary mode
Volume+ Short press Volume+ (4) on Hive X
or use your device
Short press or hold Volume+(4)
on Hive X or use your device
Volume– Short press Volume– (3) on Hive X
or use your device
Short press or hold Volume– (3)
on Hive X or use your device
Next Track Hold Volume+ (4) button for
2 seconds
N/A
Previous Track Hold Volume– (3) button for
2 seconds
N/A
Play/Pause Track Short press MFB (2) Short press MFB (2)
Answer Call Short press MFB (2) N/A
End Call Short press MFB (2) N/A
Reject Call Double press MFB (2) N/A
Redial Double press MFB (2) N/A
Pair with NFC
1. On your device make sure both the NFC and Bluetooth functions are switched on
2. With the Hive X powered on and not connected to another device, place your device over the
NFC (9) icon and your device will automatically pair to the speaker
3. A prompt might appear saying ‘Pair to KS Hive X’
4. Select ‘Pair’ and the Hive X will then be paired to your device
5. A double beep will sound to conrm pairing and the LED indicator (6) will ash every 2 seconds
Playing music on your speaker
Bluetooth
When connected via Bluetooth, play music on your device and the sound will play through the speaker.
Some devices may require you to select the audio output.