To Next PageTo Next PageWhat to do if attempting to access the embedded battery of Kitsound REUNION?
If you attempt to access or remove the embedded battery in your Kitsound Speakers, it may cause personal injury and will damage the product. The product has an embedded, non-replaceable battery, so do not attempt to access or remove it.
General| Type | Portable Bluetooth Speaker |
|---|---|
| Dimensions | 190 x 70 x 70 mm |
| Weight | 580g |
| Bluetooth Range | 10 meters |
| Connectivity | Bluetooth |
Guidance on initial setup, connecting speakers, and powering on the device.
Procedure for replacing the coin cell battery in the remote control unit.
Details on how to operate the Reunion speakers using the remote control buttons.
Explanation of the LED indicator lights and their corresponding operational states.
How to turn the speakers on and off from standby mode using the remote.
Instructions for pairing Bluetooth devices, including re-pairing and new device setup.
Methods for connecting audio sources via 3.5mm aux and RCA cable inputs.
How to adjust volume, bass, and treble levels using the speaker's dials or remote.
Cycling through Bluetooth, AUX, and RCA input modes using the control dial.
Guidelines on how to maintain and clean the Reunion speakers, and what to avoid.
Detailed specifications including Bluetooth version, connectivity range, and power requirements.
Guidance for resolving common problems and contact information for support.
Information regarding the product's compliance with EU directives and where to find the full text.
