4 5
Pairing a wireless device
1. Hold the MFB (4) down for 3 seconds. You will see the LED indicator (2)
ash blue and red and enter pairing mode
2. Turn on your iOS, Android, or Windows device’s Bluetooth ON and
search for new devices
3. Select ‘KS Slammers’ from the list of found devices. If asked for a
passcode, enter ‘0000’ or ‘1234’ and the headphones will then be
connected to your device
4. After pairing successfully, the LED indicator (2) will have a ashing
blue light; you can then answer the phone or listen to your music
5. The next time you switch the headphones on; they will automatically
search for and attempt to connect to the last paired device
Note: ‘Bluetooth’ is a trademark of Bluetooth SIG, Inc. This product is
in no way aliated or endorsed by Bluetooth SIG Inc.
Re-pairing or pairing new devices
1. Make sure you have turned o the wireless connectivity on any
previously paired devices
2. Follow the ‘Pairing a wireless device’ instructions from step 1
Call handling
Answer a call Press MFB (4) to answer. You can increase the
volume by using Volume+ (1) or Volume– (3)
Reject a call Hold MFB (4) to reject the incoming call
End call Press MFB (4) while in the call to end it
Re-dial Press MFB (4) twice in quick succession to redial
the last phone number you called on your device
To Next Page
Loading...
