EasyManua.ls Logo

Kitsound Slammers - Music Playback and Wired Use; Playing Music Controls; Wired Connection Mode; Care and Maintenance

Kitsound Slammers
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 7
Playing music
Play/Pause Press (don’t hold) MFB (4)
Adjusting the volume Hold Volume+ (1) or Volume– (3). The volume
can also be adjusted on your device
Music selection Press Next track (1) or Previous track (3)
Wired use
1. Turn o the headphones
2. Plug the 3.5 mm Aux cable into the 3.5 mm Aux port (6) and into
your device
Note: All functions are controlled via your device.
Care for your Slammers
Please DON’T:
Get the Slammers wet
Drop the Slammers as this will invalidate your warranty
Open up the Slammers. There are no user serviceable parts inside
Expose the Slammers to extreme temperatures or rapid changes of
hot to cold or vice versa
Please DO:
Clean the Slammers with a soft dry cloth and no detergents

Related product manuals