Need help?Do you have a question about the Kittec CB Series and is the answer not in the manual?
General| Brand | Kittec |
|---|---|
| Model | CB Series |
| Category | Industrial Equipment |
| Language | English |
General safety instructions must be strictly observed to avoid risk or danger while working.
Electric kilns are built for firing, thermal treatment, and melting of ceramics, china, enamel, glaze, and glass.
Explains various safety symbols and their meanings, including manual reading, hot kilns, high voltage, hot surface, and power plug.
Lists essential safety instructions for safe work with the kiln, covering installation, prohibited uses, surface temperatures, unauthorized access, and material usage.
Guidelines for storing and transporting the kiln, emphasizing dry rooms, avoiding temperature fluctuations, and using proper lifting equipment.
Requirements for suitable installation rooms, floors, and clearance for heat radiation to prevent ignition.
Instructions for checking and tightening lid clamps on toploader kilns periodically for safety and proper function.
Details on connecting the supplied exhaust pipe and extending it to the atmosphere with precautions for rainwater and wind.
Recommendations for professional checking of electrical connections, fuse sizes, and accessibility of main isolator switches.
Steps for initial operation and test firing, including firing empty, building oxide layer, drying residue, and controller setup.
Advice on opening, distributing ware evenly, and filling the firing chamber to avoid energy wastage. Includes a warning for CL series base heating.
Steps for starting the firing process using the controller, and explains the function of the optional supply air bottom valve.
To Next Page