16
6 Kiln disposal
The decommissioning must be well prepared if the kiln is to
be reassembled and installed in another location. Please
disconnect the kiln from the power supply and any further
connection.
It is recommended to disassemble all mounting parts
thoroughly, to label and if necessary, to pack them. This helps
to ensure that all parts can be reassembled properly.
With each firing process the heating elements and (for electric
kilns also) the brickwork become fragile, so KITTEC
®
denies
liability for all kind of transport damage.
Final disposal:
If no take-back or disposal agreement has been made, recycle
all disassembled components of the kiln.
For more information on appropriate disposal please contact
your local Environmental Agency.
To Next Page
Loading...