Need help?Do you have a question about the Kiturami TURBO-17 and is the answer not in the manual?
High-tech controller judging operation status and controlling boiler with self-diagnosis and various modes.
Burner with secondary combustion using a heated metal plate, eco-friendly and ensuring safety.
Explanation of the Turbo Cyclone Burner's secondary combustion technology and benefits.
Steps for installing flue for boiler rooms, considering existing and non-existing flue scenarios.
Important warnings and recommendations for installing heating and hot water pipes correctly.
Guidelines for installing oil pipes when the oil tank is higher than the burner.
Guidelines for installing oil pipes when the oil tank is lower than the burner, with cautions.
Safety guidelines and procedures for connecting electrical wires, emphasizing proper earthing.
Instructions on how to adjust the ignition rod's position for proper ignition, with cautions.
Table detailing burner specifications (capacity, consumption, nozzle, controller) for different models.
Pre-operation checklist to ensure proper installation and safety before turning on the boiler.
Step-by-step instructions and tools required for assembling or disassembling the burner.
Procedure for removing and installing temperature and overheating sensors, including sealing.
Detailed steps for cleaning the heat exchanger's exhaust tubes, including disassembly and soot removal.
Guide to identifying and resolving faults using error codes, including meanings and causes.
Comprehensive table of technical specifications for all TURBO models, including performance and dimensions.
To Next Page
General
