EasyManua.ls Logo

Kiturami K1-22E - User Manual

Kiturami K1-22E
55 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model : K1-22E/28E/34E/40E
(Wall Hung type & Indirectly Water heater
& Combination boiler)
• NaturalGas(NG
)
– Factory Default
• LiquidPropaneGas(LP
)
– Field-replaceable
 (Refertothegasconversionmanual.)
Manual
WARNING
ReadtheInstallationManualcarefullyandbesurethatyourcombinationboilerhasproperlyassembled,
installedandmaintained.Failuretofollowtheseinstructionsexactlycouldresultinareorexplosion,
seriousbodilyinjuryand/orpropertydamage.
Thisproductmustbeinstalledandservicedbyalicensedplumber,alicensedgastter,oraprofessional
technicianinaccordancewithalllocalcodes.
Improperinstallationand/oroperationbyanunqualiedpersonwillvoidthewarranty.
– Donotstoreorusegasolineorotherammablevaporsandliquidsinthevicinityofthisoranyotherappliance.
– WHATTODOIFYOUSMELLGAS
· Donottrytolightanyappliance.
· Donottouchanyelectricalswitch;donotuseanyphoneinyourbuilding.
· Immediatelycallyourgassupplierfromaneighbor’sphone.Followthegassupplier’sinstructions.
· Ifyoucannotreachyourgassupplier,calltheredepartment.
– Installationandservicemustbeperformedbyaqualiedinstaller,serviceagencyorthegassupplier.
Iftheinformationinthese instructions are not followed exactly, a re or explosion mayresultcausingproperty
damage,personalinjuryordeath.
K1-22E/28E/34E/40E COMBINATION BOILER
ۣૐ
۞ইૐ઺Ҵૐ
ೠҴ࢑সӏѺ ಿ૕҃৔మ
<유럽-CE 인증> <터키-TSE 인증> <러시아-GOST R 인증>
<러시아-CTR 인증> <카자흐스탄-GOT 인증> <우크라이나-GOST 인증>
<관세동맹국-EAS 인증> <미국-ETL 인증> <미국-Energy Star 인증>
<미국-NSF 372 인증> <미국-NSF 5 인증> <미국-SQAMD 인증>
<미국-ASME H 인증><미국-ASME HLW 인증>
<국제표준규격>
<일본 JIA 인증>
<CTI 인증> <AMCA 인증>
<중국 인증>
<북미 인증>
<ASME 인증> <AHRI 550/590인증> <AHRI 410인증>

Table of Contents

Questions and Answers

  • B
    belinda00Aug 18, 2025
    How to fix ignition failure in Kiturami K1-22E Boiler?
    • K
      Kim JonesAug 18, 2025
      If your Kiturami Boiler fails to ignite, start by ensuring the main gas supply valve is open. Also, verify that the gas supply and inlet gas meet the required specifications.
  • A
    Amy SantosAug 20, 2025
    What to do if Kiturami Boiler flame detection fails?
    • B
      burkemichaelAug 21, 2025
      If your Kiturami Boiler is experiencing flame detection issues, try cleaning the flame window. Also, make sure that the front cover is securely closed and check the flame sensor.
  • A
    Angelica PetersonAug 23, 2025
    What to do if my Kiturami K1-22E detects gas leakage?
    • T
      tina13Aug 23, 2025
      If your Kiturami Boiler detects a gas leak, check all gas connections using a soapy solution to identify leaks and fix them. Also, inspect the condition of the burner assembly.
  • D
    Debbie CarterAug 26, 2025
    Why Kiturami K1-22E shows 'Low Heating Water Pressure'?
    • D
      dawsonkristenAug 26, 2025
      If your Kiturami Boiler indicates low heating water pressure, it might be lower than the set pressure. Check the setting for low heating water pressure. Also, inspect the water pressure sensor and the water feeder inlet pressure.
  • C
    Christopher JonesAug 28, 2025
    What to do if Kiturami Boiler showing 'Fan Speed Error (High rpm)'?
    • S
      Samuel CabreraAug 28, 2025
      To reset the 'Fan Speed Error (High rpm)' code on your Kiturami Boiler, disconnect the power and then reconnect it.
  • J
    Juan RobertsAug 30, 2025
    What to do if Kiturami Boiler showing 'Fan Speed Error (Low rpm)'?
    • P
      Patrick CisnerosAug 30, 2025
      If your Kiturami Boiler shows a 'Fan Speed Error (Low rpm)', inspect the fan motor. Also, ensure that the connector is securely attached.
  • M
    Maria KnightSep 2, 2025
    How to troubleshoot 'DHW Outlet Thermistor Open or Short Circuit' on Kiturami K1-22E?
    • L
      llopezSep 2, 2025
      To troubleshoot a 'DHW Outlet Thermistor Open or Short Circuit' error on your Kiturami Boiler, first ensure all connections are secure. Then, check the sensor resistance; if it's zero, replace the sensor.
  • L
    Linda GillSep 4, 2025
    Why Kiturami K1-22E shows 'Supply Thermistor during Heating Operation (Exceed 95°C)'?
    • C
      cwelchSep 4, 2025
      If your Kiturami Boiler displays 'Supply Thermistor during Heating Operation (Exceed 95°C)', it indicates that the main heat exchanger has overheated. Try flushing the heat exchanger.
  • H
    Holly GonzalezSep 7, 2025
    What to do for 'Air Pressure Switch Abnormality' in Kiturami K1-22E Boiler?
    • V
      vhornSep 7, 2025
      If your Kiturami Boiler shows an 'Air Pressure Switch Abnormality', ensure the exhaust pipe is free of obstructions. Clean the intake air pipe and check for clogs in the condensate trap or drain pipe.
  • J
    John GatesSep 9, 2025
    What does 'Overheating Heating Supply Thermistor during Heating Operation (Exceed 95°C)' mean for Kiturami K1-22E?
    • D
      Dr. Rebecca Oconnor PhDSep 10, 2025
      If your Kiturami Boiler displays 'Overheating Heating Supply Thermistor during Heating Operation (Exceed 95°C)', this means the main heat exchanger has overheated. You should flush the heat exchanger.

Summary

Safety Information

Safety Symbols Explained

Product Information

Technical Specifications Overview

Comprehensive technical data and performance metrics for boiler models.

Control Panel Features

Before Installation

Electrical Supply and Safety

Requirements for electrical connection, grounding, and isolation.

Gas Supply Connection Standards

Guidelines for safe and compliant gas supply connection.

Water Supply and System Filling

Boiler Location and Ventilation

Condensate Drain System

Detailed instructions for installing the condensate drain pipe.

Minimum Clearances and Flue Positioning

Required space and flue terminal placement rules.

Basic Flue System Connection

Horizontal Coaxial Flue Fitting

Guide to installing the horizontal coaxial flue system.

Vertical Coaxial Flue Fitting

Twin Flue System Installation

Wall Preparation and System Filling

Installation

Horizontal Flue System Connection

Boiler Electrical Connections

Guidance for safe and compliant electrical installation.

Power Cable Connection

Thermostat and Sensor Wiring

Commissioning

Pre-Commissioning Checks

Boiler Commissioning Procedure

Step-by-step guide for the commissioning process.

Air-Deration Function Operation

Gas Settings and Combustion Analysis

Procedures for setting gas type and measuring combustion.

Gas Conversion Procedures

Steps for converting the boiler between gas types.

Natural Gas to Propane Conversion

Detailed guide for converting from Natural Gas to Propane.

Boiler Operation

Adjusting Heating Temperature

Adjusting Hot Water Temperature

Installer Mode Configuration

Troubleshooting

Boiler Error Code Reference

List of error codes and their corresponding remedies.

Kiturami K1-22E Specifications

General IconGeneral
BrandKiturami
ModelK1-22E
CategoryBoiler
LanguageEnglish

Related product manuals