4 5
Getting started
Charging
1. Using the micro USB charging cable, connect
the micro USB connector to the micro USB
port (7) on the base of the Sele Stick, and the
other to a PC USB port or USB mains charger
2. The LED indicator (6) will illuminate solid red on
the base whilst charging
3. When fully charged the LED indicator (6) will
turn o
Operation
1. Turn the Sele Stick on by sliding the power
switch (8) to the ON position
2. Turn your iOS, Android, or Windows device’s
Bluetooth ON and search for new devices.
Select ‘KV Pocket Sele Stick’ from the list of
found devices and wait for it to say ‘connected’
3. Open your smartphone’s camera application
4. Place your smartphone in the Smartphone
holder (1), by pulling the top grip upwards.
Ensure it is well secured
[continued...]
To Next Page
Loading...