DN9650/DN9652 Network Bridge
Operator Manual 27
Appendix A: Technical Specification
This appendix contains the technical specifications specific to the DN9650 and DN9652
Network Bridges.
Due to a policy of continual improvement, Klark Teknik reserves the right to alter the
function or specification at any time without notice.
Table 4: DN9650 technical specification
Table 5: DN9652 technical specification
Inputs/
outputs
Three
Type AES50, EtherCon®, 24 bi-directional
channels of 24-bit, 96kHz audio
Terminations Audio
Power
AES50, EtherCon®, 24 bi-directional
channels of 24-bit, 96kHz audio
3-pin IEC
Power
requirements
Voltage
Frequency
Consumption
100VAC to 240VAC ±10%
50Hz to 60Hz
<90W
Dimensions Height
Width
Depth
44.5 mm (1.75”), 1U high
482.0 mm (19”)
410.0 mm (16.1”)
Weight Net
Shipping
5.5 kg
7.5 kg
Operation Temperature +5°C to +45°C
Storage Temperature -20°C to +60°C
Terminations Power 3-pin IEC
Power
requirements
Voltage
Frequency
Consumption
100VAC to 240VAC ±10%
50Hz to 60Hz
<90W
Dimensions Height
Width
Depth
44.5 mm (1.75”), 1U high
482.0 mm (19”)
410.0 mm (16.1”)
Weight Net
Shipping
5.5 kg
7.5 kg
Operation Temperature +5°C to +45°C
Storage Temperature -20°C to +60°C
To Next Page
