Need help?Do you have a question about the Klark Teknik Square one and is the answer not in the manual?
General| Brand | Klark Teknik |
|---|---|
| Model | Square one |
| Category | Cables and connectors |
| Language | English |
Discusses power supply type, voltage range, and connection safety.
Explains how to handle ground loop issues using LIFT switches and DI boxes.
Provides guidance on safely moving and interacting with the device.
Details requirements for proper setup, including power and earthing quality.
Recommends ideal placement for optimal performance and ventilation.
Specifies the use of high-quality balanced, screened, twisted pair audio cables.
Warns against applying phantom power to unbalanced sources.
Addresses FCC compliance and methods to correct interference.
Cautions about potential signal degradation in electromagnetic fields.
Advises against operating with covers removed or guards compromised.
Describes the device as an active mic splitter for live sound reinforcement.
Lists the key capabilities and components of the Square ONE Splitter.
Advice on connecting close to mic sources for optimal sound quality.
Explains primary applications and secondary uses for transformer isolated outputs.
Details emergency connections and single mic location usage.
Instructions for carefully unpacking and inspecting the equipment.
Guidance on verifying the correct fuse type and rating before installation.
Details rack mounting, placement, and earthing requirements.
Steps to safely connect the unit to the mains power outlet.
Guidance on connecting the splitter to other audio equipment.
Diagram showing connector pin assignments for balanced devices.
Recommendations for connecting unbalanced devices, including DI box use.
Instructions for switching the unit on and its readiness for operation.
Describes the input/output section with transformer isolated outputs.
Details the eight-channel section with individual channel controls.
Covers headphone output, power status, and media split functionality.
Details the electronically balanced input and output connectors.
Explains the recessed switches for media split and ground lift functions.
Information on the IEC socket, fuse drawer, and voltage specifications.
Guidelines for setting gain, using solo, and understanding output quality.
How to use the solo function for monitoring individual channels.
Instructions for connecting headphones and adjusting volume for monitoring.
Details how to activate and use the media split function.
Explanation of how to eliminate ground loop problems.
Illustrates splitting signals for FOH, MON, and broadcast.
Shows splitting signals for FOH, MON, and an on-site recorder.
Demonstrates providing isolated feeds from group outputs to broadcast.
Details input types, levels, impedance, and CMRR.
Specifies output types, levels, impedance, and signal drive capacity.
Details the type and rating of the headphone output.
Lists the audio connectors used for inputs and outputs.
Specifies voltage, frequency, and consumption.
Provides frequency response, distortion, dynamic range, and noise floor.
Details the filter frequency and slope.
Provides the physical height, width, and depth of the unit.
Lists the net and shipping weight of the product.
Provides background information on mic splitter types and their functions.
Explains the basic principles and drawbacks of passive splitters.
Describes isolated splitters using transformers and their advantages.
Details active splitters, their benefits over passive/isolated types, and features.
Recommends monthly checks for cleaning and control functionality.
Provides instructions for safely cleaning the equipment.
Details procedures for safely inspecting and changing the fuse.
To Next Page
