More about splitters
Square ONE Splitter 23
More about splitters
This section is intended to provide some useful background information on mic splitters.
Introduction
In its very basic form, a splitter accepts mic/line signals and splits each signal for distribution to a number of
different processing devices. However, more advanced solutions are required to cope with factors within a
sound system that cause signal degradation and produce external noise and radio frequency (RF)
interference. These factors include the number of splits required and the length of cable runs, and also the
inherent problems imposed by the low level of the mic signal and multiple-grounding. The types of splitter
and how they are designed to overcome these problems are discussed in further detail in the following
subsections.
To Next Page
