Klarstein 10010174 - Page 13

Preparation
1. Buy one standard 5 liter party keg.
Attention: only use 5L beer keg stoppers in below:
Note:
Ifthekeghasbeenshaken(transport,etc.),thebeermustbeallowedtostandforasucienttimeprior
to use.
2. Cool the 5 liter party keg prior to use. The optimal drinking temperature is about 6-8℃. The beer
from a warmer keg is less refreshing. Heavy foaming can also result. To cool the keg in the beer
dispenser, it is recommended to place it in the connected dispenser the day before. At a keg
temperature of about 23℃,itisrecommendedtowait16hoursbeforepullingtherstglassesofbeer.
Note: The cooling time in the refrigerator is between 6 and 12 hours depending on the brand and capac-
ity due to the sophisticated cooling technology. This allows the cooling to process to be accelerated. Stor-
ingthe5literpartykeginarefrigeratoroerstheadvantageofalwayshavingasecondkegreadytouse.
Attention: Never cool the party keg in a freezer as it can burst. Shock cool-
ing can impair the quality of beer.
3. No matter what stopper you choose for 5 liter keg, it is necessary
to use the supplied tools for removing the stopper.
4. Note:Beforeremoving thestopper, alwaysrstventthekeg asstatedon the kegandallow
 standingforasucientperiodsothatthefoamdoesnotescapefromtheventopening.
5. Once the stopper has been removed, the supplied universal beer keg stoppers can be inserted
into the bunghole in the keg.
Note:
Do not dispose of the universal beer keg stoppers after emptying the keg, but remove and clean with
warmwaterandasmallamountofmildwashingupliquidandretainforreuse.Removethebeerkeg
stoppersbygrippingtheedgeoftherubberringandpullingrmlywiththeotherhandtoensurethatit
does not tip over.
6. Subsequently place it vertically on the tap opening of the stopper
andpushitdownwardsrmlyandevenlyintothekeg.Firstattach
the dispensing unit to the back of the keg. Push down on the front
of the unit until it clicks in place. The dispensing unit is now ready to
use.
Attention: Before using the 5 liter party keg, always check the best
before date!
Attention: Ensure that the keg lid is not dented so that the clamps of
the dispensing unit can grip under the edge of the lid.
only use 5L beer keg stoppers in below:
ingthe5literpartykeginarefrigeratoroerstheadvantageofalwayshavingasecondkegreadytouse.
Never cool the party keg in a freezer as it can burst. Shock cool-
3. No matter what stopper you choose for 5 liter keg, it is necessary
Beforeremoving thestopper, alwaysrstventthekeg asstatedonthe kegandallow
 standingforasucientperiodsothatthefoamdoesnotescapefromtheventopening.
12
13