Klarstein 10028519 - Cleaning and Maintenance; Dust Box Cleaning; Brush System Maintenance

19
Cleaning of Dust Box
1. Move the two side clips of the dust box, open the fencing plate and pour off dust (as shown on Figure 1);
2. Clean it with the cleaning brush (as shown on Figure 2).
Figure 1 Figure 2 Figure 3
Assembly & Disassembly of Brushes
• Force the locking bar forward and raise the cover by your right thumb, then raise the brushes.
• Insert the main brush and floor brush into the holes before closing the cover in assembly.