What to do if the handle control of my Klarstein CASWELL Vacuum Cleaner doesn't work?
If the handle control isn't working, it could be due to a few reasons: * The dirty water tank might be full, so you should empty it. * The dirty water tank might not be installed correctly; ensure it is properly installed. * The roller brush might be missing; check and install the roller brush.
Why my Klarstein CASWELL Vacuum Cleaner cannot be charged?
Your Klarstein Vacuum Cleaner might not be charging due to these reasons: * The power supply unit might not be connected correctly, so check its connection. * The unit might not be properly connected to the charging station. In this case, put the cleaner back on the charging station.
General| Brand | Klarstein |
|---|---|
| Model | CASWELL |
| Category | Vacuum Cleaner |
| Language | English |
Displays ECO or MAX operating mode status via light indicators.
Shows operating time, self-cleaning countdown, and error codes.
Alerts for full dirty water tank or low clean water level.
Indicates battery charging status and spray function activation.
Instructions for attaching and detaching the device handle.
Guide to correctly filling and inserting the clean water tank.
Steps for properly installing the dirty water tank.
Procedure for fitting the roller brush into the device.
How to attach the viewing window to the roller brush.
Instructions for connecting the charging station to power.
Aligning the unit with the charging station to start charging.
Activating the self-cleaning function when the unit is charging.
Tilting the unit and pressing the on/off button to begin use.
Important tips for efficient and safe device operation.
Steps for cleaning the dirty water tank and its housing.
How to clean the roller brush after use or when dirty.
Instructions for removing and drying the HEPA filter.
Recommended frequencies for cleaning or replacing accessories.
Troubleshooting steps if the device fails to charge.
Resolving problems with the device's handle controls.
Fixing issues with the clean water tank level display.
Addressing a reduction in the device's suction performance.
Solutions for leaks from the clean water tank.
Troubleshooting when the spray function does not dispense water.
Resolving issues with the device's voice control feature.
Fixing problems when self-cleaning mode is not active.
Addressing water leakage from the air outlet.
Resolving issues that make the unit hard to maneuver.
Fixing false indications of a full dirty water tank.
To Next Page
