34
EN
Important notes on operation
• If there is a large amount of foam in the dirty water tank during operation,
clean the dirty water tank in good time to prevent the water from owing into
the fan motor.
• To prevent water from owing into the fan motor, avoid rapid pushing and
pulling during operation
• Watch out for dirt in the dirty water tank while working so as not to block the
detector and affect full water detection.
• Before charging the device, switch it off.
CLEANING AND CARE
Note: Unplug the device, switch off the device and remove the battery before
servicing and maintaining the device.
Water tank maintenance
Clean the dirty water tank and its housing after each use to prevent odours from
forming. Hold the water tank handle with your hand, press the safety catch down
with your thumb and carefully pull out the dirty water tank.
To Next Page
Loading...
