Klarstein CASWELL - Water Drops at Air Outlet; Unit Difficult to Move; Incorrect Dirty Water Tank Full Indicator

38
EN
Problem Possible cause Solution
There are drops of water at the
air outlet.
The HEPA lter is not installed. Check and install the HEPA
lters.
The HEPA lter is not dry. Dry the HEPA lters before
use.
The vacuum has been tilted
heavily.
Use the unit correctly.
The cleaner absorbs the foam
liquid.
Empty the dirty water tank in
good time.
The unit is difcult to move. The roller brush is not installed
properly.
Check the roller brush and
replace it.
The indicator light shows that
the dirty water tank is full,
although it is not.
The cleaner absorbs too much
foam liquid.
Remove the foam liquid
immediately.