EasyManua.ls Logo

Klarstein 10028701 - Cleaning; Operation

Klarstein 10028701
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Operation
Setting the temperature
For the upper zone, the temperature can be adjusted in the range of 7-12 °C.
For the lower zone, the temperature can be adjusted in the range of 12-18 °C.
The temp you want can be settled by touching the “set temp up button” and “set temp down button” with
your finger.
When the inside temperature higher than the settled point cooling system will be work normally. When
the inside temperature lower than the settled point, cooling system stop working. And the inside tempera-
ture will be rise. When it rises above the set point, Cooling System starts to work again, the cellar enter
into cooling circles.
After you set the temperature, the LCD display will return to show the temperature in the cooler, but
it could turn to the point that you have set gradually.
Turning the light on and off
The Light can be turned OFF or ON by touching the “Light button.
Temperature display in degrees Celsius or Fahrenheit
Press the key „°C/°F“ to change the display of the temperature between Fahrenheit or Grad Celsius.
Cleaning
Shut off power supply before cleaning cabinet.
Take out wines and shelves, and then clean the cabinet with soda water first and with clean water last.
Do not use soap or detergent for the cabinet.
Clean the cellar regularly.

Related product manuals