What to do if Klarstein 10031629 shows ERR-2?
If your Klarstein Brewing System displays 'ERR-2', it indicates that the temperature is higher than 120 °C, which means there is an overheat or boil-dry warning. This is due to sensor failure. Please contact your dealer for a replacement.
What to do if Klarstein 10031629 Brewing Systems shows ERR-1?
If 'ERR-1' is displayed on your Klarstein Brewing Systems, it means the temperature is lower than -20 °C, indicating a low-temperature warning. To solve this, open the underneath and check the sensor. If it's loose, reconnect it.
How to do temperature correction on Klarstein 10031629 Brewing Systems?
To perform a temperature correction on your Klarstein Brewing Systems, press the '–' and '+' buttons simultaneously to enter the C1 temperature correction setting. The setting range is from -10°C to +10°C (or -50°F to +50°F). Press the Temp button to confirm the setting and exit the temperature correction page.
How to fix ingredients stuck in the pump of Klarstein 10031629 Brewing Systems?
If you have ingredients stuck in the pump of your Klarstein Brewing Systems, you can try the following: * Flush the pump by connecting a hose to the curve pipe. * Dismantle the pump to remove the ingredients.
General| Category | Brewing Systems |
|---|---|
| Capacity | 30 liters |
| Material | Stainless steel |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
To Next Page
