What to do if my Klarstein Brewing System fails to reach 100 °C?
If your Klarstein Brewing System is not reaching the desired temperature of 100°C, place the lid on the device for 1 to 2 minutes and perform a temperature correction.
What to do if my Klarstein Brewing System shows ERR-2 on display?
The error code ERR-2 on your Klarstein Brewing System indicates that the temperature is higher than 120 °C, which means overheat or boil-dry warning. Please contact dealer for replacement.
Why does my Klarstein Brewing System suddenly go off during heating?
If your Klarstein Brewing System shuts down unexpectedly during the heating process, it may be due to overheating. Try reducing the heating temperature.
How to fix temperature correction on Klarstein Mundschenk 3XL?
To correct the temperature on your Klarstein Brewing System, press the '-' and '+' buttons simultaneously to enter the C1 temperature correction setting. The setting range is from -10°C to +10°C (or -50 °F to +50 °F). Press the Temp button to confirm the setting and exit the temperature correction page.
What to do if my Klarstein Brewing System shows ERR-1 on display?
The error code ERR-1 on your Klarstein Brewing System indicates a low temperature warning because the temperature is lower than -20 °C. Please contact Customer Service.
How to remove ingredients stuck in the pump of my Klarstein Mundschenk 3XL?
To address ingredients stuck in the pump of your Klarstein Brewing System: * Flush the pump by connecting a hose to the curve pipe. * If flushing doesn't work, dismantle the pump to manually remove the trapped ingredients.
General| Material Type | Stainless steel |
|---|---|
| Material | Stainless Steel |
| Voltage | 220-240V |
| Included accessories | Brewing basket, malt pipe, false bottom |
| Control Type | Digital |
To Next Page
