Klarstein 10031814 User Manual (English)

Questions and Answers:

B
bgomezAug 17, 2025
Why Klarstein 10031814 remote control is not working?
- C
  Christine DiazAug 17, 2025
  The Klarstein Air Conditioner remote control might not be working because of several reasons: there might be severe interference (like static electricity or unstable voltage). If this is the case, pull out the plug, wait about 3 minutes, and reinsert it. Also, make sure the remote controller is within the 8m signal receiving range, without obstacles, and pointing directly at the receiving window on the indoor unit. Check the batteries and replace them if they are low. Finally, inspect the remote controller for damage and replace it if necessary.
P
perezheatherAug 20, 2025
What to do if my Klarstein 10031814 does not operate?
- N
  Nicholas JohnsonAug 20, 2025
  If your Klarstein Air Conditioner isn't operating, check for the following potential causes: a power failure (wait until power is restored), a loose plug (reinsert the plug), or a tripped air switch or blown fuse (ask a professional to replace the air switch or fuse). If the unit restarted immediately after stopping, wait 3 minutes before turning it on again. Also, ensure the function settings on the remote control are correct by resetting the function.
K
Keith HamiltonAug 22, 2025
Why is my Klarstein 10031814 Air Conditioner cooling/heating effect not good?
- K
  Kenneth BriggsAug 23, 2025
  If the cooling or heating effect of your Klarstein Air Conditioner isn't satisfactory, it could be due to several reasons. The voltage might be too low, in which case you should wait until it returns to normal. The filter might be dirty, so try cleaning it. Make sure the set temperature is appropriate. Also, check if any doors or windows are open and close them.
T
Tara SmithAug 26, 2025
How to fix Klarstein 10031814 remote control if it's not working because of the fluorescent lamp?
- D
  Diane SheltonAug 26, 2025
  If a fluorescent lamp in the room is interfering with your Klarstein Air Conditioner remote control, try moving the remote control closer to the indoor unit. If that doesn't work, turn off the fluorescent lamp and try again.
S
Scott GarciaAug 27, 2025
Why is mist emitted from my Klarstein Air Conditioner?
- E
  Ernest SmithAug 28, 2025
  Mist might be emitted from the indoor unit's air outlet of your Klarstein Air Conditioner if the indoor temperature and humidity are high. This happens because the indoor air is being cooled rapidly. The mist should disappear as the indoor temperature and humidity decrease over time.
S
sarahhamptonAug 30, 2025
What to do if there is no air emitted from Klarstein 10031814 Air Conditioner?
- A
  Alyssa AustinAug 30, 2025
  If no air is coming from your Klarstein Air Conditioner, first check if the air inlet or outlet of the indoor unit is blocked and eliminate any obstacles. If you're in heating mode, the unit might have reached the set temperature and stopped blowing air. Also, if you've just turned on heating mode, the unit delays starting for a few minutes to prevent blowing cold air, which is normal.
J
Julia BruceSep 1, 2025
Why I can't adjust the set temperature on my Klarstein 10031814 Air Conditioner?
- C
  campbelljosephSep 1, 2025
  If you can't adjust the set temperature on your Klarstein Air Conditioner, it might be operating in auto mode, where temperature adjustments are disabled. Switch to a different mode to adjust the temperature. Also, ensure that your desired temperature is within the range of 16 °C to 30 °C.
S
Shelley CampbellSep 4, 2025
Why does my Klarstein 10031814 Air Conditioner suddenly not operate normally?
- M
  michael98Sep 4, 2025
  If your Klarstein Air Conditioner suddenly stops operating normally, it might be due to interference from sources like thunder or wireless devices. To resolve this, disconnect the power, then reconnect it, and turn the unit back on.
S
Sheila ScottSep 6, 2025
Why does my Klarstein 10031814 Air Conditioner emit odours?
- T
  Thomas BenjaminSep 6, 2025
  If your Klarstein Air Conditioner is emitting odors, it could be due to an odour source nearby, such as furniture or cigarette smoke. Eliminate the source of the odour and clean the filter.
S
Suzanne PerrySep 9, 2025
Why does Klarstein 10031814 Air Conditioner outdoor unit have vapour?
- T
  Tommy RodriguezSep 9, 2025
  If your Klarstein Air Conditioner's outdoor unit has vapour, especially when heating mode is on, it is likely due to defrosting, which is a normal phenomenon.

Klarstein 10031814 Specifications

General

Cooling Power	9000 BTU/h
Refrigerant	R32
Air flow rate	360 m³/h
Air Flow (High)	360 m³/h
Power supply	220-240 V, 50 Hz
Energy Efficiency Ratio (Cooling)	2.6

Summary

Safety Instructions

Product safety

Key safety precautions regarding the use and handling of the air conditioner.

Specific safety instructions

Additional safety guidelines for optimal and safe operation of the air conditioner.

Product Description

Indoor unit

Description and identification of the components of the indoor air conditioning unit.

Outdoor unit

Description and identification of the components of the outdoor air conditioning unit.

Remote Control

Icons on display screen

Explains symbols and indicators shown on the remote control's display screen.

Key Combinations

Explains how to use button combinations for features like keypad lock and unit mode switching.

Function Description

Details specific functions like Auto Quiet and its operation in different modes.

Cleaning and Maintenance

Clean surface of indoor unit

Instructions on how to clean the exterior surfaces of the indoor air conditioning unit.

Checking before use season

Pre-season checks to ensure the air conditioner is ready for operation and in good condition.

Checking after use-season

Post-season procedures for cleaning and preparing the air conditioner for storage.

Troubleshooting

Error codes

Lists and explains error codes displayed by the air conditioner and their corresponding solutions.

Installation Instructions Indoor Unit

Installion dimension diagram

Provides a diagram showing required clearances and dimensions for installing the indoor unit.

Tools for installation

Lists the necessary tools required for the proper installation of the air conditioner.

Selection of installation location

Guidelines for choosing an appropriate location for the indoor unit, considering environmental factors.

Check after installation

A checklist of items to verify after the indoor unit has been installed to ensure proper function.

Test operation

Instructions for performing a test run of the air conditioner after installation to confirm its operation.

Configuration of connection pipe

Details on standard and maximum lengths for connection pipes based on cooling capacity.

Pipe expanding method

Detailed instructions on how to properly expand pipes to prevent refrigerant leaks.

Installation Instructions Outdoor Unit

Installation dimension diagram

Diagram illustrating required clearances and dimensions for installing the outdoor unit.

Safety Precautions for the installer

Critical safety guidelines for professionals installing or relocating the air conditioning unit.

Required tools for installation

Lists essential tools needed for the installation process.

Selection of installation location

Guidelines for choosing the optimal placement for the indoor unit, considering environmental factors.

Grounding requirement

Explains the importance and method of properly grounding the air conditioner for electrical safety.

Installation of outdoor unit

Step-by-step instructions for mounting the outdoor unit securely.

Vacuum pumping

Procedure for creating a vacuum in the refrigerant lines to remove air and moisture.

Leakage detection

Methods for checking the refrigerant system for leaks using detection tools or soap water.

Check after installation

Checklist of essential checks after installation to ensure system integrity and safety.

Test operation

Guide for performing a test run to verify the air conditioner's functionality and performance.

Configuration of connection pipe

Details on pipe lengths, cooling capacities, and refrigerant charging amounts.

Pipe expanding method

Detailed instructions on how to properly expand pipes to prevent refrigerant leaks.

Disposal Considerations

Declaration of Conformity

Related product manuals

Klarstein Townhouse 10034641

Klarstein 10031814 User Manual

Table of Contents

Questions and Answers:

Klarstein 10031814 Specifications

Summary

Safety Instructions

Product safety

Specific safety instructions

Product Description

Indoor unit

Outdoor unit

Remote Control

Icons on display screen

Key Combinations

Function Description

Cleaning and Maintenance

Clean surface of indoor unit

Checking before use season

Checking after use-season

Troubleshooting

Error codes

Installation Instructions Indoor Unit

Installion dimension diagram

Tools for installation

Selection of installation location

Check after installation

Test operation

Configuration of connection pipe

Pipe expanding method

Installation Instructions Outdoor Unit

Installation dimension diagram

Safety Precautions for the installer

Required tools for installation

Selection of installation location

Grounding requirement

Installation of outdoor unit

Vacuum pumping

Leakage detection

Check after installation

Test operation

Configuration of connection pipe

Pipe expanding method

Disposal Considerations

Declaration of Conformity

Related product manuals