Klarstein 10034681 - User Manual

Questions and Answers

A
Amy SkinnerAug 5, 2025
What to do if my Klarstein 10034681 unit goes off and on all the time?
- D
  Dennis SimpsonAug 6, 2025
  If your Klarstein Air Conditioner is turning off and on frequently, it could be due to several reasons. The unit might be in direct sunlight, so try closing the curtain. Open doors and windows or heat sources in the room could also be the cause; close any open doors and windows and remove any heat sources. Additionally, a dirty filter or blocked air inlets/outlets can cause this issue; clean the filter and ensure that the air inlets and outlets are clear.
X
xscottAug 9, 2025
How to fix Klarstein Air Conditioner when the device is not running?
- J
  Jenny PearsonAug 10, 2025
  If your Klarstein Air Conditioner is not running, there are a few potential causes. First, ensure that the plug is properly inserted. If the display shows 'FL', drain the water and then restart the appliance. If the timer has expired, wait 3 minutes before restarting the appliance.
J
Jose KnightAug 14, 2025
Why is my Klarstein 10034681 Air Conditioner compressor not running?
- V
  vrayAug 14, 2025
  If the compressor in your Klarstein Air Conditioner is not running, it may be because the unit has just been switched off. Wait 3 minutes and then restart the unit.
T
thomasmcknightAug 18, 2025
What to do if my Klarstein 10034681 Air Conditioner unit makes loud noises?
- A
  afreemanAug 18, 2025
  If your Klarstein Air Conditioner is making loud noises, it is possible that the unit is not level. Place the unit on a level surface to resolve this issue.
D
Donna AllenAug 23, 2025
What does E4 error mean on my Klarstein 10034681?
- B
  Brian WernerAug 23, 2025
  The E4 error code on your Klarstein Air Conditioner indicates frost protection. The coil temperature is too low, which has switched off the entire air conditioning system. If the temperature rises above 8 °C again, the protection will be deactivated, and the previous operating state will automatically be restored.
E
edwardfrostAug 27, 2025
What does E1 error mean on my Klarstein 10034681?
- C
  christineknightAug 27, 2025
  The E1 error on your Klarstein Air Conditioner indicates that the evaporator coil sensor is broken. Have the sensor replaced by a specialist company.
M
mark54Aug 31, 2025
What does E2 error mean on my Klarstein Air Conditioner?
- A
  aalexanderAug 31, 2025
  The E2 error on your Klarstein Air Conditioner means that the room temperature sensor is broken. Have the sensor replaced by a specialist company.