20
EN
QUICK OPERATION
a. Install oating Bracelet
1. Adjust the length of towing rope according to the depth of the swimming
pool.
2. Tie the rope to the position shown in the image.
3. Charge the battery by the attached adapter in the package before rst using
the device.Clean the charging pin before charging.
• The white light ashing quickly indicates that it is charging.
• It indicates that the charging is complete when the charging indicator light
turns off.
Indicator light Status on the machine
White light keeps on Standby: press the power button
Blue light keeps on Working
Red light keeps on Low battery
Flashing White light Charging
4. Start the machine.
Press the switch and the light turn white with a sound. Now the machine is
powered on to be ready to put into the water. In order to let the machine sink
to the bottom smoothly, the pool vacuum robot would start working after
about 20 seconds and the indicator light turns blue. After pressing the switch
button, if the machine is not put into water for operation the machine will
automatically shut down after 5 minutes. Press the switch again to start the
machine when you want to restart the pool vacuum robot.
To Next Page
Loading...
