Klarstein Cookio - Page 26

26
EN
Set cooking mode temperature (left & right)
Press the [Function] key a second time. Both displays show [180C], indicating that the
default temperature is 180°C. The desired temperature can be set by pressing the [+]
and [-] keys.
There are 10 temperature levels for both plates (60, 80, 100, 120, 140, 160, 180,
200, 220, 240 °C).
To exit this mode, press the [Function] key to switch to other modes or the [On/Off] key
to exit.
Note: If you press the function key several times, the system will always alternate
between power and temperature.
Setting the timer
The user can set the cooking time when a specic cooking mode is selected.
Press the [Timer] button once to access the timer function, the [TIMER] indicator lights up.
The display shows [10], which means that the default time is 10 minutes.
The desired time can be set by pressing the [+] and [-] keys. Each press of the button
changes the time by 1 minute. If you press and hold the [+] or [-] key, the time is adjusted
in 10-minute increments. The time can be adjusted from 1 minute to 240 minutes. When
you have set the desired time, press the [Timer] button once to conrm or wait until the
display stops blinking.
When the set time expires, a beep sounds and the unit automatically enters standby
mode.
To cancel this function, either press the [On/Off] button to return to Standby mode or
press and hold the [Timer] button to resume the desired power or temperature operation.