EasyManua.ls Logo

Klarstein Downfire - Cleaning and Care

Klarstein Downfire
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
EN
CLEANING AND CARE
To enjoy years of outstanding performance from the appliance, make sure you perform
the following maintenance activities on a regular basis:
Clean the appliance each time when it is used. Keep exterior surfaces clean. Never
leave salty liquids on the surface.
Clean the outside of the appliance, use a soft cloth soaked with water and a liquid
detergent. Do not use scouring pads or abrasive products.
Do not use water, inammable or abrasive cleaners.
Regularly inspect the aeration holes; if there is dust or lint, remove it without
damaging the burner or tubing.
Take care not to hit or damage the surface of the burner, the ttings and gas tubes,
the tap and all the other components of the gas circuit.
For any technical problem contact the installer or a skilled technical expert. Only a
qualied expert can replaces the parts of burner.
If you decide not to use the appliance for an extended period, it is a good idea to
follow the instructions below:
A) Close the tap on the cylinder and disconnect the regulator from the cylinder.
B) Store the cylinder in a well-ventilated room, far from inammable or explosive
materials and preferably outside your home; never store the cylinder in a basement
or attic.
C) The appliance must be stored in a dry and clean place and protected from dust
(and even better in its original packaging).

Related product manuals