What to do if Klarstein DryFy Pro is making huge noise?
If your Klarstein Dehumidifier is producing excessive noise, ensure the unit is placed on a flat, hard floor. Also, verify that the dehumidifier is correctly positioned.
Why is my Klarstein Dehumidifier not dehumidifying enough?
If your Klarstein Dehumidifier isn't removing enough moisture, check the following: * Ensure the front filter is clean. * Verify that the ambient temperature and humidity aren't too low. * Make sure the air inlet and outlet are not obstructed.
What to do if Klarstein DryFy Pro operation switch is on, but the machine is not operating?
If your Klarstein Dehumidifier's operation switch is on, but the unit isn't working, check these items: 1. Ensure the water tank is correctly placed. 2. Confirm the power plug is fully inserted. 3. Check if the fuse is broken. 4. Verify that there is power.
Why Klarstein DryFy Pro long time operation can not reach the suitable humidity condition?
If your Klarstein Dehumidifier runs for a long time without reaching the desired humidity, consider these factors: * Check if doors or windows are open too wide. * Determine if there's a source of water evaporation. * Assess whether the room is too large for the unit's capacity.
What to do if the lamp is continuously on Klarstein Dehumidifier?
If the lamp on your Klarstein Dehumidifier stays on continuously, it could indicate damage to, or loosening of, the temperature or humidity sensor.
Instructions for using and replacing the carbon filter for deodorization.
Procedure for emptying the water tank of the dehumidifier.
How to set up continuous drainage using a hose.
General| Dehumidification Capacity | 20 liters/day |
|---|---|
| Water Tank Capacity | 5 liters |
| Noise Level | 42 dB |
| Refrigerant | R290 |
| Air Flow Rate | 170 m³/h |
| Operating Temperature | 5°C - 35°C |
| Humidity Control | Adjustable |
To Next Page