Klarstein Espressionata Gusto - Filling and Refilling the Filter

28
EN
Indicator: POWER (red light):
It lights when the appliance is turned on.
Indicator: STEAM (yellow light):
It lights when the steam temperature is high enough.
Filling the Filter
1 Press the button to turn off the appliance.
2 Remove the metal funnel by rotating it clockwise away from the coffee outlet of the
appliance.
3 Insert the lter into the metal funnel as described in ASSEMBLY.
4 Fill grounded coffee into the steel mesh. A measuring spoon full of coffee powder
makes about a cup of rst-class coffee.
5 Press the coffee powder tightly into the steel mesh.
6 Lock the funnel to the coffee outlet of the appliance as described in ASSEMBLY.
Relling the Filter
1 Press the button to turn off the appliance.
2 Turn the metal funnel clockwise to release it from the coffee outlet of the appliance.
3 Remove the residual coffee grounds from the lter. Use a food safe and heat-
resistant kitchen utensil for removing the residue to prevent the steel mesh from
damage.
4 Fill fresh grounded coffee into the steel mesh and replace the metal funnel.
PREPARING BEVERAGES
Preheating the Appliance
To make a cup of good Espresso, we recommend preheating the metal components
of the appliance and the coffee cup. That way the avour of the Espresso will not be
inuenced by cold components.
NOTE: Do not put any coffee into the steel mesh when preheating. It is not
required for this step.
1 Press the button
to turn off the appliance.
2 Remove the water tank from the appliance.
3 Fill it with water. The water level must not exceed the MAX mark.
4 Carefully reinsert the tank into the appliance.