Klarstein Hot Spring plus - Operation: Steps 1-4; Pouring Water and Closing Lid; Power Connection and Reboil Initiation

22
EN
1 2
Pour water into the inner pot. Close the lid.
• Make sure the water level is below
the MAX mark. Otherwise, water
may come out from the water outlet.
• Rell the water if the water level is
below the REFILL line shown on the
gauge.
• Water easily overows when
boiling. Make sure the lid is well
closed.
3 4
Insert the plug into the power outlet.. Reboil.
• Make sure there are no foreign
objects on power cord before
connect power supply, such as
nails, pins.
• Press the “Reboil” button to start
reboil water and indicator on.