13
EN
Getting Started
Insert plug into the supply socket. Press
switch button, the machine begin to work.
You can adjust the airow by pushing the
sliding block up and down.
Operation of blower
• Always wear safety goggles before using the blower.
• Keep bystanders clear from blowing debris.
• Wear a dust mask if blowing creates dust that might be inhaled.
1
Make sure that the power cord is disconnected from the socket.
2
Unscrew the inserted hose assembly from the suction port with a left-hand
rotation.
3
Insert the main cannula of the hose assembly into the air outlet on the top of the
head and tighten it with the right hand rotation.
4
Insert the power cord.
5
Start the switch button.
6
Hold the hose assembly, let outlet port aimed at the leaves and so on.
Using the Accessory
Wet oor nozzle
for oor, carpet,
etc.
Bristle for
Windows, table,
etc.
Crevice nozzle for
crevice, corner,
etc.
Blowing mouth for
blowing the dust
away in the crevice
of the machine.
To Next Page
Loading...
