14
EN
CLEANING AND CARE
Barrel Cleaning
After working or when the barrel is full of dust which cause suction decreases
considerably, you should cut off the electricity and clean the dust away from the barrel.
• Unfasten the locking knob, lift up the top cover.
• Take off the lter bag, clean the dust away in the dust barrel.
• Install the lter bag back and place the top cover.
Cleaning the HEPA lter
The HEPA lter should be washed with clean, warm water if it is covered with dust. If
necessary, use a mild detergent.
• Remove the HEPA lter.
• Wash it.
• Let it dry.
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should
be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of
this product, please contact your local council or your household
waste disposal service.
To Next Page
Loading...
