Klarstein LOIRE - Page 39

39
EN
Problem Potential cause Possible solution
The display lights up,
but the device does not
work.
The "Start/Stop" button
was not pressed.
Select the function again
and press the "Start/
Stop" button.
No water in the tank,
protection against
overheating.
Fill with water to the
intended level, allow the
unit to cool, and then
restart.
Beeping alarm during
operation.
First unplug the power
cord to turn o the
device. Then plug the
plug back in and start up
the device as described
in the instructions.
Device error. Contact a specialist
company for testing and
repairs.