Need help?Do you have a question about the Klarstein Skyscraper 2G and is the answer not in the manual?
General| Placement | Floor, Table |
|---|---|
| Cord length | 1.65 m |
| Fan diameter | - mm |
| Product color | Black |
| Auto oscillating | Yes |
| Number of speeds | 3 |
| Height adjustment | - |
| Oscillation range | 180 ° |
| Timer duration (maximum) | 7 h |
| Power requirements | 220 - 240 V |
| Power consumption (typical) | 40 W |
Weight and Dimensions| Width | 225 mm |
|---|---|
| Height | 800 mm |
| Weight | 2400 g |
Set timer for 0-7 hours in 1-hour increments; press to cycle through options and set duration.
Cycle through fan speeds: low, medium, high. Press speed button to change settings.
Activate or deactivate fan oscillation by pressing the OSC button. OSC indicator shows status.
Press power button to start fan on low speed. Press again to turn off the unit.
To Next Page
