Klarstein Steam Buddy - Cleaning and Maintenance; Type of Fabric and Thermostat Dial Form

To Next Page

To Previous Page

Please plug the iron into the electric outlet the light on the handle will blink until the iron

will reach the right temperature. Once your hand will touch the iron handle the iron will

be on . Once you remove your hand from the handle the iron will automatically turn off.

in order to activate please put your hand on the handle than iron will automatically turn

on.

TYPE OF FABRIC AND THERMOSTAT DIAL FORM

Instructions on label Type of fabric Thermostat dial

Nylon Silk

MIN

MAX

Wool

Cotton

Linen

Caution: If the fabric consists of various kinds of  bers, always select the lowest ironing

temperature of the composition of those  bers

CLEANING AND MAINTENANCE

Before cleaning, remove the plug from the socket and allow the iron to cool down

suf ciently.

1. Wipe off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner.

2. If the  ber is adhered to the soleplate, use a damp cloth with vinegar to wipe off the

soleplate.

3. Never use strong acid or alkali in order to avoid damaging the soleplate.

4. If the scale blocks the steam hole, please remove the scale with toothpick; do not

damage the surface of soleplate.

5. Stand the iron on its end and let it cool down suf ciently, and meantime pour any

remaining water out of the box, set the steam regulator to position “O”.