Klarstein Valkyrie - Cleaning and Maintenance

21
EN
CLEANING AND MAINTENANCE
WARNING
Risk of injury! All cleaning and maintenance should be carried out
when the barbecue is cool and with the fuel supply turned OFF at the
gas cylinder.
Outside surface
• Use a mild detergent or baking soda and hot water solution. Non-abrasive
scouring powder can be used on stubborn stains, then rinse with water.
Barbecue lid
• If the inside surface of the barbecue lid has the appearance of pealing paint, baked
on grease build-up has turned to carbon and is  aking off. Clean thoroughly with
strong hot soapy water solution. Rinse with water and allow to completely dry.
Never use oven cleaner!
Interior of barbecue bottom
• Remove residue using brush, scraper and/or cleaning pad then wash with a soapy
water solution. Rinse with water and allow to dry.
Wooden surfaces
• Wash with a soft cloth and hot soapy water solution. Rinse with water. Do not use
abrasive cleaners, degreasers or a concentrated barbecue cleaner on wooden
parts.
Cooking grid
• Use a mild soapy water solution. Non-abrasive scouring power can be used on
stubborn stains then rinse with water.
Cleaning the burner assembly
1 Turn the gas OFF at the control knob and disconnect the cylinder.
2 Remove cooking grill and cooking plate.
3 Clean the burner with a soft brush or blow clean with compressed air and wipe with
a cloth.
4 Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper
clip).
5 Inspect burner for any damage (cracks or holes). If damage is found, replace with
a new burner. Reinstall the burner, check to ensure that the Gas valve ori ces are
correctly positioned and secured inside the burner inlet (venturi).