Klarstein Waterfall - Water Tank Cleaning; Machine Body Cleaning; Installation After Cleaning; Maintenance

25
EN
Water tank cleaning
1. Cut off the power and rotate the water tank lock to horizontal direction, then take
the water tank out.
2. Use the towel to clean the incrustation of the water tank by cleanser, and then use
water to wash and pour the dirty water out.
Machine body cleaning
1. Use wet towel to clean the machine body, washing by water directly is forbidden.
2. Do not wash by corrosive cleanser or solvent.
3. The power should be off and power cable should be pulled out when cleaning the
machine body, or there is electric shock risk.
Installation after cleaning
1. Install the air lter net, wet curtain assembly and water tank orderly and ensure the
installation is correct.
2. Link the power and conrm the machine runs smoothly.
Maintenance
1. If the machine has not been used for a long time, the power cable should be
pulled out and the machine should be packed to prevent dust.
2. Please ensure the wet curtain and air lter net is dry and there is no water in the
tank before packing.