Why is my Klarstein Air Conditioner not cooling properly?
Poor cooling can occur if the air filter is dirty, so clean the air filter. Also, ensure the set temperature is appropriate and adjust it if necessary. Finally, make sure that doors and windows are closed properly.
What to do if my Klarstein New Breeze Air Conditioner remote isn't working?
First, ensure the remote controller is within 8 meters of the air conditioner and that there are no obstacles blocking the signal. If the remote's sensitivity is low, check and replace the batteries if needed. If there's a fluorescence lamp in the room, move the remote closer to the air conditioner or turn off the lamp.
How to fix a Klarstein New Breeze Air Conditioner that won't turn on?
If your air conditioner isn't operating, make sure the plug is properly inserted. If the unit was recently stopped, wait for 3 minutes before turning it on again.
What to do if my Klarstein New Breeze displays E8?
If your unit displays 'E8', check if the evaporator and condenser are blocked. If they are, remove the obstructions and then power cycle the unit. If the issue persists, contact after-sales service.
What does H3 mean on my Klarstein New Breeze Air Conditioner and how to fix it?
The 'H3' error code indicates an overload protection for the compressor. Check if the unit is in a high-temperature, high-humidity environment. If the ambient temperature is too high, power off the unit and wait until the temperature drops below 35°C before turning it back on.
What to do if my Klarstein New Breeze displays F0 error?
If your Klarstein air conditioner shows 'F0', turn it off, unplug it for 30 minutes, and then re-energize it. If the malfunction continues, contact after-sales service.
Why can't I adjust the temperature on my Klarstein New Breeze?
If you can't adjust the temperature, it might be because the unit is in auto mode, where temperature adjustments are disabled. Also, the required temperature might be outside the setting range of 16°C-30°C.
What to do if my Klarstein Air Conditioner is making abnormal sounds?
If there's an abnormal sound during operation, the unit might be interfered with by thunder or radio waves. Disconnect the power, then restore it, and turn the unit on again.
Why is no air blowing from my Klarstein Air Conditioner?
If no fan is blowing out, check if the air outlet or inlet is blocked and eliminate any obstacles.
What does H8 mean on my Klarstein New Breeze?
If your air conditioner displays 'H8', it means the chassis is full of water. Pour out the water. If the error persists, contact a professional.
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Remote Control | Yes |
| Cooling Power | 2.6 kW |
| Cooling Power (Watts) | 2600 W |
| Energy Efficiency Class | A |
| Operating Modes | Cooling, Fan, Dehumidification |
| Timer | Yes |
| Operating Temperature (Cooling) | 18°C - 35°C |
Essential safety guidelines for operating the air conditioner to prevent damage and ensure user safety.
Identifies and describes the main parts of the air conditioner unit, including panels and outlets.
Details the layout and functions of the remote control buttons for operating the unit.
Explains the buttons and indicators on the air conditioner's control panel for manual operation.
Step-by-step guide for removing, cleaning, and drying the air filter.
Table of common issues with their possible causes and recommended solutions for the air conditioner.
List and explanation of error codes displayed by the air conditioner for diagnosing issues.
To Next Page