Klarstein Metrobreeze New York 7K User Manual (English)

Questions and Answers:

L
Lynn Powell DDSAug 1, 2025
What to do if my Klarstein Metrobreeze New York 7K unit goes off and on all the time?
- W
  watkinsjamesAug 1, 2025
  If your Klarstein Air Conditioner is turning off and on frequently, it could be due to several reasons. The unit might be in direct sunlight, so try closing the curtain. Open doors and windows or heat sources in the room could also be the cause; close any open doors and windows and remove any heat sources. Additionally, a dirty filter or blocked air inlets/outlets can cause this issue; clean the filter and ensure that the air inlets and outlets are clear.
G
Gregory WallaceAug 5, 2025
How to fix Klarstein Metrobreeze New York 7K Air Conditioner when the device is not running?
- N
  Nicole WilliamsAug 6, 2025
  If your Klarstein Air Conditioner is not running, there are a few potential causes. First, ensure that the plug is properly inserted. If the display shows 'FL', drain the water and then restart the appliance. If the timer has expired, wait 3 minutes before restarting the appliance.
A
Angela PriceAug 10, 2025
Why is my Klarstein Air Conditioner compressor not running?
- A
  Alan RomeroAug 10, 2025
  If the compressor in your Klarstein Air Conditioner is not running, it may be because the unit has just been switched off. Wait 3 minutes and then restart the unit.
H
hillgrantAug 14, 2025
What to do if my Klarstein Metrobreeze New York 7K unit makes loud noises?
- T
  tgarciaAug 14, 2025
  If your Klarstein Air Conditioner is making loud noises, it is possible that the unit is not level. Place the unit on a level surface to resolve this issue.
H
Heidi ManningAug 18, 2025
What does E4 error mean on my Klarstein Metrobreeze New York 7K Air Conditioner?
- B
  Brandi RayAug 19, 2025
  The E4 error code on your Klarstein Air Conditioner indicates frost protection. The coil temperature is too low, which has switched off the entire air conditioning system. If the temperature rises above 8 °C again, the protection will be deactivated, and the previous operating state will automatically be restored.
K
kylemahoneyAug 23, 2025
What does E1 error mean on my Klarstein Metrobreeze New York 7K Air Conditioner?
- L
  Lauren BrownAug 23, 2025
  The E1 error on your Klarstein Air Conditioner indicates that the evaporator coil sensor is broken. Have the sensor replaced by a specialist company.
R
Robert MartinAug 27, 2025
What does E2 error mean on my Klarstein Metrobreeze New York 7K?
- C
  Christopher JohnsonAug 27, 2025
  The E2 error on your Klarstein Air Conditioner means that the room temperature sensor is broken. Have the sensor replaced by a specialist company.

Klarstein Metrobreeze New York 7K Specifications

General

Cooling Capacity	7000 BTU/h
Energy Efficiency Ratio (EER)	2.6
Energy Efficiency Class (Cooling)	A
Refrigerant	R290
Air Flow Rate	380 m³/h
Cooling Area	20 m²
Remote Control	Yes
Installation Kit Included	Yes
Room Size (Recommended)	20 m²
Power Supply	220-240 V~ / 50 Hz
Timer	24 hours
Noise Level	65 dB(A)
Operating Temperature (Cooling)	18-35°C