Why is the refrigeration effect of my Klarstein Metrobreeze 9 New York City Air Conditioner not good?
If your Klarstein Air Conditioner isn't cooling well, the issue might be due to direct sunlight (try pulling the curtains), open doors or windows, too many people, or a heat source in the room (close doors and windows and remove the heat source). Also, a dirty filter screen can reduce cooling efficiency, so clean or replace it.
What to do if Klarstein Metrobreeze 9 New York City does not work?
If your Klarstein Air Conditioner isn't working, first, ensure it's powered on. If the screen displays “FL”, restart it, allowing it to return to normal after any power cut and drainage. Also, check if the off-timer function is activated and restart the unit after it has been off for 3 minutes.
How to reduce noise from Klarstein Metrobreeze 9 New York City?
If your Klarstein Air Conditioner is too noisy, it might not be placed on a flat surface. Ensure it's on a flat and solid surface to avoid shaking.
Why compressor does not work in Klarstein Air Conditioner?
If the compressor of your Klarstein Air Conditioner isn't working, it could be due to activated compressor delay protection. Wait 3 minutes and restart the unit once its temperature has reduced.
General| Brand | Klarstein |
|---|---|
| Model | Metrobreeze 9 New York City |
| Category | Air Conditioner |
| Language | English |
Instructions for fitting the window sealing plate for proper installation.
How to operate the air conditioner in refrigeration mode.
Instructions for using the dehumidification function and drainage.
To Next Page