Klarstein Wonderwall - Remote Control Display Indicators; Operation and Functions; Button [M]

17
EN
REMOTE CONTROL DISPLAY INDICATORS
OPERATION AND FUNCTIONS
Button [M]
• Press the [M] button switch between System time/Thermostat
• Press and hold the [M] button under certain program slot to initiate a programming
into the slot.
System Thermostat
Slot number
Day
Program type
AM/PM
RF Connection status
Current temperature
Socket status
Centigrade degree
Target temperature
Fahrenheit degree
Battery low warning
Cool mode
Heat mode
Daylight saving time
Program start time
Program end time