Klauke HK 5 - Page 22

Instruction manual HK 5 page 22
___________________________________________________________________________
Index
1. Introduction
2. Labels
3. Warranty
4. Description of the hand-hydraulic crimping unit
4.1. Description of the components
4.2. Description of the operation
4.3. Description of the crimping processes
5. Remarks in respect of the determined use
5.1. Operation of the units
5.2. Explanation of the application range
5.3. Mounting instructions
5.4. Service and Maintenance instructions
5.5. Oil changing cycles
5.6. Storage and transport of the crimping unit.
5.7. Reference as to which (spare-) parts can be exchanged by the customer.
6. Troubleshooting
7. Putting out of action/waste disposal
8. Technical data
Instruction manual HK 5 page 22
___________________________________________________________________________
Index
1. Introduction
2. Labels
3. Warranty
4. Description of the hand-hydraulic crimping unit
4.1. Description of the components
4.2. Description of the operation
4.3. Description of the crimping processes
5. Remarks in respect of the determined use
5.1. Operation of the units
5.2. Explanation of the application range
5.3. Mounting instructions
5.4. Service and Maintenance instructions
5.5. Oil changing cycles
5.6. Storage and transport of the crimping unit.
5.7. Reference as to which (spare-) parts can be exchanged by the customer.
6. Troubleshooting
7. Putting out of action/waste disposal
8. Technical data