Klein Tools 56412 - User Manual

1
56412
Rechargeable Flashlight with Worklight - Instructions
Linterna Recargable con Luz de Trabajo - Instrucciones
Lampe de poche rechargeable avec lampe de travail - Instructions
ENGLISH
8
FIG. A
CONTENTS
•
56412 Rechargeable Flashlight with Worklight
•
19" USB-C Cable
•
Instruction Manual
GENERAL SPECIFICATIONS
• Battery Cell Type: 18650
•
Cell Chemistry: Lithium-Ion
•
Operating/Storage Altitude: 6562 ft. (2000 m)
•
Operating/Charging Temperature: 32° to 104°F
(0° to 40°C)
•
Storage Temperature: -22° to 140°F (-30° to 60°C)
(up to 3 months)
•
Storage Humidity: <75% Relative humidity
•
Relative Humidity: <85% non-condensing
•
Charging Time: Charge from empty to full in 6 hours
•
Shelf Life: Charge every 3 months
•
Life Expectancy: Up to 500 charging cycles typical
(depending on use & care)
•
Battery Capacity: 2600mAh
•
Charging Requirements: Max 5.0V D.C, Min .650A
•
Drop Protection: 6 ft. (2 m)
•
Ingress Protection Rating: IP66
•
Standards:
REACH, RoHS, CE-EMC, CEC
Specifications subject to change.
WARNINGS
Read, understand, and follow these instructions
to ensure safe operation. Failure to observe these
warnings can result in risk of fire, electric shock,
serious injury and/or property damage.
•
Use of a power supply, charger, or cable not
recommended or sold with this unit may result in a
risk of fire or injury to persons.
•
DO NOT use the product if it is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion, or injury.
• DO NOT subject to vibration, impacts, or drops. The
housing may not show signs of damage, but internal
components may have been compromised. It is
advisable to replace the unit if any such severe events
occur.
•
DO NOT expose to direct sunlight, open flame, heat
sources, equipment that produces heat, or extremes
in environmental temperature.
•
Keep away from high voltage devices.
•
DO NOT attempt to repair the flashlight or charging
cable. There are no user-serviceable parts.
•
DO NOT immerse in water or other liquids. Avoid
spilling liquids or falling foreign objects into openings
on the unit.
•
Risk of fire and burns. DO NOT open, crush,
heat above manufacturer’s specified maximum
temperature or incinerate.
•
Properly seal the charging port cover to achieve
specified water & foreign object ingress protection
Keep seal free of dirt, oil, sand, or other material that
interferes with proper sealing. Failure to do so can
result in risk of fire or electric shock.
•
DO NOT open the charging port cover if wet or in a
wet environment. Thoroughly dry the unit and the
seal around water-resistant cover completely before
opening water-resistant cover.
•
When the flashlight is in use or charging, make
sure there is adequate space to allow ventilation of
internally generated heat.
•
Use safety-rated power supply or wall adapter. Never
use power supply or wall adapter that exceeds the
specified charging voltage and current.
•
Route the power supply cable so that it will not to be
stepped on or pinched by other objects.
•
Follow Manufacturer’s Instructions.
•
DO NOT attempt to insert other USB connector types
into USB-C port.
•
DO NOT attempt to remove or replace the 18650 Battery
FEATURE DETAILS (FIG. A)
1
Flashlight
5
Battery Level Indicator
2
Glow Ring
6
USB Charging Port
3
Worklight
7
Pocket Clip
4
Power button
8
USB-C Charging Cable
.
4
3
2
6
7
5
w ww . . co m
information@itm.com1.800.561.8187

Summary

General Specifications

Operating and Storage Conditions

Details operating and storage temperature, altitude, and humidity ranges for the device.

Performance Specifications

Outlines battery capacity, charging time, charging requirements, and drop protection rating.

Ingress Protection and Standards

Specifies the Ingress Protection rating (IP66) and compliance with relevant standards.

Safety Warnings

Product Integrity and Handling

Warnings against using damaged products, exposing to extreme conditions, or attempting unauthorized repairs.

Electrical and Fire Hazards

Precautions regarding power supply, liquid immersion, battery handling, and proper sealing of the charging port.

Charging and Cable Safety

Guidelines on using correct chargers, cable management, and avoiding incompatible USB connectors.

Feature Details

Flashlight Components

Identifies key physical components of the flashlight, including the light, worklight, and power button.

Charging and Accessory Features

Details the battery level indicator, USB charging port, pocket clip, and USB-C charging cable.

Operating Instructions

Charging the Battery

Instructions on how to access the port, connect the cable, and understand the battery level indicator during charging.

Powering On;Off and Mode Selection

Guide on using the power button to activate the unit, switch between modes, and adjust brightness.

Mounting and Troubleshooting

Information on using the magnetic endcap and pocket clip, plus common issues and solutions.

Klein Tools 56412 Specifications

General

Brand	Klein Tools
Model	56412
Category	Flashlight
Language	English