Klein Tools 56413 - User Manual

To Next Page

56413

Rechargeable 2-Color LED Flashlight with Holster – Instructions

Linterna LED Recargable de 2 Colores con Funda – Instrucciones

Lampe de poche rechargeable à DEL bicolore avec étui– Instructions

ENGLISH

CONTENTS

• 56413 Rechargeable 2-Color LED Flashlight

• 6" USB-C Cable

•

Holster

• Instruction Manual

GENERAL SPECIFICATIONS

• Battery Cell Type: 18650

•

Cell Chemistry: Lithium-Ion

•

Operating/Storage Altitude: 6562 ft. (2000 m)

•

Operating/Charging Temperature: 32° to 104°F (0° to 40°C)

•

Storage Temperature: -22° to 140°F (-30° to 60°C)

(up to 3 months)

•

Storage Humidity: <75% Relative humidity

•

Relative Humidity: <85% non-condensing

•

Charging Time: Charge from empty to full in 6 hours

•

Shelf Life: Charge every 3 months

•

Life Expectancy: Up to 500 charging cycles typical

(depending on use & care)

•

Battery Capacity: 2600mAh

•

Charging Requirements: 5V 0.650A, 3.25W

•

Drop Protection: 6 ft. (2 m)

•

Ingress Protection Rating: IP64

•

Standards: REACH, RoHS, CE-EMC, CEC, NRCAN

Specifications subject to change.

WARNINGS

Read, understand, and follow these instructions to ensure

safe operation. Failure to observe these warnings can

result in risk of fire, electric shock, serious injury and/or

property damage.

•

Use of a power supply, charger, or cable not recommended

or sold with this unit may result in a risk of fire or injury to

persons.

•

DO NOT use the product if it is damaged or modified.

Damaged or modified batteries may exhibit unpredictable

behavior resulting in fire, explosion, or injury.

•

DO NOT subject to vibration, impacts, or drops. The

housing may not show signs of damage, but internal

components may have been compromised. It is advisable

to replace the unit if any such severe events occur.

•

DO NOT expose to direct sunlight, open flame, heat

sources, equipment that produces heat, or extremes in

environmental temperature.

•

DO NOT expose product to rain or snow.

•

Keep away from high voltage devices.

•

DO NOT attempt to repair the flashlight or charging cable.

There are no user-serviceable parts.

•

DO NOT immerse in water or other liquids. Avoid spilling

liquids or falling foreign objects into openings on the unit.

•

Risk of fire and burns. DO NOT open, crush, heat above

manufacturer’s specified maximum temperature or

incinerate.

•

Properly seal the charging port cover to achieve specified

water & foreign object ingress protection. Keep seal free of

dirt, oil, sand, or other material that interferes with proper

sealing. Failure to do so can result in risk of fire or electric

shock.

•

DO NOT open the charging port cover if wet or in a wet

environment. Thoroughly dry the unit and the seal around

water-resistant cover completely before opening water-

resistant cover.

•

When the flashlight is in use or charging, make sure

there is adequate space to allow ventilation of internally

generated heat.

•

Use safety-rated power supply or wall adapter. Never use

power supply or wall adapter that exceeds the specified

charging voltage and current.

•

Route the power supply cable so that it will not to be

stepped on or pinched by other objects.

•

Follow Manufacturer’s Instructions.

•

DO NOT attempt to insert other USB connector types into

USB-C port.

FEATURE DETAILS (FIG. A)

LED light

Power button

Battery level indicator

Magnet

USB-C charging port

USB-C charging cable

Pocket clip

DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash.

Items must be properly disposed of in accordance with

local regulations. Please see www.epa.gov or

www.erecycle.org for additional information.

OPERATING INSTRUCTIONS

PLEASE SEE REVERSE SIDE.

FIG. A

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Other manuals for Klein Tools 56413

Instructions2 pages

Need help?

Do you have a question about the Klein Tools 56413 and is the answer not in the manual?

Summary

Operating Instructions

Charging Battery

Twist collar to access port. Connect USB-C cable to flashlight and USB port/adapter. Monitor battery level indicator.

Power On;Off Button

Press to activate/deactivate. Hold to cycle modes. Next press shuts off if light on > 5 sec.

Mounting Options

Use magnet on endcap for ferrous surfaces. Pocket clip is removable. Holster attaches to belt.

Maintenance

Cleaning

Disconnect device from power sources and wipe with clean, dry, lint-free cloth.

Storage

Charge fully before storage, recharge every 3 months. Store in cool temperatures, mild humidity, away from sunlight.

Recharging

Recharge as needed. Avoid full discharge. Inspect ports and cable for damage. Do not attempt to fix.

Summary

Operating Instructions

Charging Battery

Twist collar to access port. Connect USB-C cable to flashlight and USB port/adapter. Monitor battery level indicator.

Power On;Off Button

Press to activate/deactivate. Hold to cycle modes. Next press shuts off if light on > 5 sec.

Mounting Options

Use magnet on endcap for ferrous surfaces. Pocket clip is removable. Holster attaches to belt.

Maintenance

Cleaning

Disconnect device from power sources and wipe with clean, dry, lint-free cloth.

Storage

Charge fully before storage, recharge every 3 months. Store in cool temperatures, mild humidity, away from sunlight.

Recharging

Recharge as needed. Avoid full discharge. Inspect ports and cable for damage. Do not attempt to fix.

The Klein Tools 56413 is a rechargeable 2-color LED flashlight designed for various illumination needs, offering both white LED spotlight and area light, as well as red LED options. It comes with a 6" USB-C cable, a holster, and an instruction manual, emphasizing safe operation and proper maintenance.

Function Description:

The 56413 flashlight provides versatile lighting with its 2-color LED system. It features a white LED spotlight for focused illumination, a white LED area light for broader coverage, and red LEDs for situations where preserving night vision or signaling is required. The flashlight is powered by a rechargeable lithium-ion battery, making it a sustainable and convenient lighting solution. Its design includes a magnetic endcap for hands-free mounting on ferrous surfaces and a removable pocket clip for secure carrying. The included holster allows for easy attachment to a belt, ensuring the flashlight is readily accessible.

Important Technical Specifications:

Battery Cell Type: 18650 Lithium-Ion
Battery Capacity: 2600mAh
Charging Requirements: 5V 0.650A, 3.25W
Charging Time: Approximately 6 hours from empty to full
Life Expectancy: Up to 500 charging cycles (typical)
Operating/Charging Temperature: 32° to 104°F (0° to 40°C)
Storage Temperature: -22° to 140°F (-30° to 60°C) for up to 3 months
Operating/Storage Altitude: 6562 ft. (2000 m)
Drop Protection: 6 ft. (2 m)
Ingress Protection Rating: IP64 (dust tight and protected against splashing water from any direction)
Humidity: <75% Relative humidity (storage), <85% non-condensing (relative humidity)
Standards: REACH, RoHS, CE-EMC, CEC, NRCAN

Usage Features:

The flashlight is activated by pressing and releasing the power button, which initially turns on in HIGH flashlight mode. Holding down the power button cycles through the available modes (white LED spotlight, white LED area light, red LEDs). Once a desired mode is selected, subsequent clicks of the power button will reduce the brightness within that mode. A convenient feature is that if the light remains on for more than 5 seconds in any mode, the next press of the power button will turn it off directly, saving the user from cycling through all modes. The flashlight also remembers the last used mode and will turn on in that mode when reactivated.

Charging the device involves twisting a collar just below the flashlight head to reveal the USB-C charging port. The included USB-C cable connects to the flashlight, and the other end plugs into a USB (2.0 or higher) port or an AC adapter (not included). The USB adapter/power supply should not exceed 5.0V DC and 0.650A. A battery level indicator provides clear status updates:

Solid Green: 100% charge
Blinking Green: 50-99% charge
Blinking Yellow: 26-49% charge
Blinking Red: 16% to 25% charge
Solid Red: 0% to 15% charge The battery indicator also shows for 5 seconds when the device is powered on. It's important to note that the flashlight may not operate in all modes while charging.

For mounting, the integrated magnet on the endcap allows for attachment to any ferrous surface, providing hands-free operation. The pocket clip is removable by unscrewing the endcap, offering flexibility in carrying options. The included holster can be attached to a belt, providing a secure and accessible storage solution for the flashlight.

Maintenance Features:

Proper maintenance is crucial for extending the life and ensuring the safe operation of the 56413 flashlight.

Cleaning: Before cleaning, the device should be disconnected from all power sources. Use a clean, dry, soft, lint-free cloth to wipe down the unit. Abrasive cleaners or solvents should not be used.
Storage: For storage longer than one month, the flashlight should be fully charged and then recharged approximately every 3 months to prevent full discharge. It should be stored in cool temperatures, mild humidity, and away from direct sunlight. Extreme hot or cold temperatures can negatively impact service life, performance, and potentially lead to overheating or fire. After storage, visually inspect the device and accessories for satisfactory condition and allow it to return to ambient conditions before recharging or using.
Recharging: The flashlight should be recharged as needed, avoiding complete discharge on a regular basis to maximize overall battery life. Regularly inspect the charging ports and cable for any debris, dirt, damage, or corrosion. Do not attempt to fix damaged components; replace the device and/or cable as needed.
Sealing: To maintain the specified water and foreign object ingress protection (IP64), the charging port cover must be properly sealed. Ensure the seal is free of dirt, oil, sand, or other materials that could interfere with proper sealing. The charging port cover should not be opened if wet or in a wet environment; the unit and the seal must be thoroughly dried before opening.
Ventilation: When the flashlight is in use or charging, ensure there is adequate space for ventilation to dissipate internally generated heat.
Power Supply: Always use a safety-rated power supply or wall adapter that meets the specified charging voltage and current. Never use a power supply that exceeds these specifications.
Cable Management: Route the power supply cable to prevent it from being stepped on or pinched.
USB Port: Do not attempt to insert other USB connector types into the USB-C port.

The device is designed with safety in mind, but users are warned against subjecting it to vibration, impacts, or drops, as internal components may be compromised even if external damage is not visible. Exposure to direct sunlight, open flame, heat sources, or extreme environmental temperatures should be avoided. The flashlight should not be immersed in water or other liquids, and liquids or foreign objects should not be spilled into its openings. Opening, crushing, heating above the specified maximum temperature, or incinerating the battery poses a risk of fire and burns. The flashlight contains no user-serviceable parts, and attempts to repair it are not recommended.

For disposal and recycling, the equipment and its accessories should not be placed in regular trash but disposed of according to local regulations, with resources like www.epa.gov or www.erecycle.org provided for additional information.