Bluetooth Speaker
AEPJS1
User Manual
Accessories:
1. Micro USB Cable ( for charging )
2. 3.5mm Audio cable ( AUX-in cable )
3. User Manual
Highlights :
IPX6 waterproof, suitable for outdoor.
Bluetooth Connection:
Turn the speaker on by pressing the power for several seconds, then the blue led flashes quickly.
The speaker now has entered the Bluetooth pairing mode.
Connect to mobile phones:
1. Activate your phone's Bluetooth
2. Go to your phone's Bluetooth settings , scan for new Bluetooth devices
3. Upon device found(AEPJS1), click the device name and pair with it
4. If your phone ask for pairing code , please enter ”0000” and confirm it.
5. After successful pairing, your speaker will sound a prompt tone and the LED lights blue.
Note: Pairing time is varied with different mobile phones.
Bluetooth Connection:
Speaker will have the voice instruction for incoming call.Short Press
to answer the call and
talk to the speaker directly. Short press
to end the call and back to play status. Long press
to reject the incoming call.Long press to dial back the last dialed phone, but it will be
invalid if there is no phone conversation.
AUX audio-in connector:
The speaker also features 1x AUX audio in port, simply connect the speaker with your
non-Bluetooth mobile phone/MP3 player/PC/laptop with the 3.5mm jack audio cable. The green
will be on, then you can play music via wired connection
Low power indication: Speaker will have voice hint to remind you to charge if battery is
low( battery only left 10%). Users need to charge the speaker timely.
Charging and computer connection :
Connect the micro USB charging cable to a computer or USB charger, red Led indication for
charging status.
Red LED goes off upon charging finished.