Klein Tools KLEIN OPENER - General Installation: Mounting the Bracket; Steps 4 & 5: Bracket Placement and Mounting

5
General Installation:
Mounting the Bracket
5
Up to 8 inches
Now it is time to mount your Kleen
Opener.
First place the mounting bracket on the
dumpster top rail. The arm should be
inside the dumpster with the mounting
bolts on the outside as shown.
It is easiest to hold the Kleen Opener with
your left hand.
Make sure the bracket is resting at
against the top rail.
The mounting bracket should be placed
anywhere from 1/2 inch up to 8 inches
from the back rail of the dumpster where
the hinge of the lid is located.
Smaller dumpsters can mount between 1/2
in to 4 inches from the back rail. For larger
dumpsters with long lids, mount between 4
to 8 inches from the back rail.
4
First make sure you are on the correct side
of the dumpster. Left Side and Right Side
are determined when facing the front of
the dumpster.
Manually open the lid before installation.
LEFT SIDE RIGHT SIDE
This manual shows a general installation with a metal angled mount. There are
four dierent mount types based on dumpster material and conguration. To nd
mount specic instructions to match your dumpster see pages 11-13.
TOP RAIL