General Installation:
Mounting the Bracket
6
7
8
Use the 3/4 in. socket on the ratchet
to tighten the mounting bolts.
Alternate between each bolt as you
tighten.
Turn until both bolts are FIRM and
SNUG.
6
First hand tighten the mounting bolts to
steady the Kleen Opener on the top rail.
Then put a couple of drops of
Threadlocker on the mounting bolt as
shown.
YOU CAN NOW SAFELY REMOVE THE
NYLON TIE
with cutting tool, scissiors, or wire
cutters (not provided)
To Next Page
Loading...
