EasyManua.ls Logo

Klepper Aerius - User Manual

Klepper Aerius
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FALTB
OO
TE
Congratulations!
You finally have your new boat, your KLEPPER:As you can see, this is the technical masterpiece. Built with the greatest care
and precision, known in many parts of the world, since 1907, as the BASIC boat of its kind.
Often called „ingenious“, that it is. But even more important: it is the result of practical experience in all possible and impos-
sible applications.The chosen materials are the proven materials for excellent service and long years of use.
„Mature design“ shows in the absolute simplicity: no tiny parts, no nuts, no bolts.All locks are attached in the right place, our
famous snaplocks. Outstanding materials: only air-dried Mountain Ash, long grained, selected for long parts; and precisely lami-
nated Finnish Birch are used, protected by our proprietary marine deep painting varnish system.
Through the years, the hull with built-in airsponsons retains a perfect fit, resists cold and hot conditions, fresh water and salt-
water, folding and storage. It is unique for insulating qualities in ice-water, providing a healthy interior climate (breathable, self-
drying properties of natural material).
Altogether: a combination of material which will serve you for many years.
Each boat has been carefully assembled at the factory, inspected and carefully packed. It will usually be re-inspected at the point
of sale. In case of shipment: all shipments are insured, please let us know, if part is unsatisfactory upon receipt.We want you
to have a Klepper you will be proud of, for your water activities and enjoyment.An important part of the system is YOU,THE
OWNER. Kindly study these pages, more information is available through further instructions, newsletters, magazines, and
books written by Klepper owners, through groups and clubs.
We realize, that all new owners will first do Sunday paddling, then weekends, then vacation trips - one after the other.You will
gain much experience, and become very comfortable with your Klepper. At this point it should be said, that the boat can take
a lot of use and abuse, but as a general rule: Stay away from powerful rivers and pounding surf, as sharp objects below water,
hit with force, could cause damage. Fortunately, a Klepper is well repairable by the owner, almost anywhere in the world.The
common sense and sensible care by the skipper is paramount: you choose the day, you choose the location and your partners.
Please do not forget: Boating in general is not free of risks. Risks can be reduced, almost eliminated through thoughtful, sensi-
ble trip planning.
Ask or read about basic safety rules: there would always be al life-jacket rule, in some cases a headgear is used.There are also
boating rules of the road. Please inform at convenient offices.We believe in club membership, if at all possible, learning from
others.As you advance, be sure to be familiar with boathandling and currents, with ebb and tide along the shore, with obstacles,
such as dams, trees, bridges. Great idea to learn step-by step - try to find experienced friends, who will help you.Always con-
sider your own-well-being and that of your crew, for which you are responsible. Consider your crew, your equipment, your
knowledge of wind and weather, your protective clothing. Stay away from over-ambitious adventures, do not take unneeded
risks.Temper your ambitions, stay within your capabilities.There is so much enjoyment and satisfaction in healthful, invigora-
ting paddling- out in unspoiled nature, far away from the maddening crowd, clean and recreational.We know you will greatly
enjoy it, with your KLEPPER - step by step.
Assembly Maintenance Aerius Klepper (all Modells)
Question and Answer IconNeed help?

Do you have a question about the Klepper Aerius and is the answer not in the manual?

Summary

Klepper Aerius Boat Assembly

Assembly of Front Half

Detailed steps for assembling the front section of the Klepper Aerius boat frame.

Mounting First Crossribs

Instructions for attaching the initial crossribs to the keelboard during assembly.

Mounting Two Gunwales

Guidance on attaching the left and right gunwales to the boat's frame.

Assembly of Rear Half

Step-by-step instructions for assembling the rear section of the boat frame.

Put Frame Halves into Boathull

Process for inserting the assembled front and rear frame halves into the boat hull.

Placement of Cockpit Coaming

Instructions for installing the cockpit coaming and mast bracket correctly.

Sternpiece of Coaming (Boomerang)

Specific procedure for attaching the stern coaming piece to the boat.

Attaching a Rudder Assembly

Guide on connecting the rudder assembly, including foot pedals and cables.

Klepper Aerius Operation and Maintenance

Inflation of Airsponsons

Instructions for inflating the boat's air sponsons for proper shaping and positioning.

Placement of Seats

Steps for correctly positioning and securing the boat's seats.

Attachment of Backrests

Procedure for attaching the front and rear backrests to the frame.

Attaching a Spraycover

Method for attaching the spraycover to protect the boat.

Taking Boat Apart

Instructions for disassembling the Klepper boat after use.

How to Pack Boat into Bags

Guidance on efficiently packing the boat components into their storage bags.

Proper Folding and Storage

Proper Folding of Boat Hull

Detailed steps for folding the Klepper boat hull into a compact package.

Typical Storage

Advice for short-term and typical storage of the boat indoors.

Storage of Assembled Boat

Guidelines for storing the boat when it remains assembled.

Klepper Aerius Specifications

General IconGeneral
BrandKlepper
ModelAerius
CategoryBoat
LanguageEnglish