Klever KCJ-1 User Manual

Safety Recommendations
• Place non-cutting hand above/away
from cut path.
• Do NOT modify our product—
use only as intended.
• Dispose of worn product.
Boxes
• Align cutter opening at corner/edge of box.
• Angle handle slightly to improve ease of cut.
• Pull cutter with even force to cut box.
Tip: Klever safety cutters have different
openings; select based on box material
and application.
CAUTION: Even though these are Safety products, please understand that blade edges are sharp.
HANDLE WITH CARE.
Tape
• Align cutter opening with edge of tape.
• Pull through tape to cut.
Tip: Cutting tape with tape splitter end
can reduce tape residue on blade,
and prolong blade life. Push splitter
end down and through tape.
Tae Splitter
KLEVERINNOVATIONS
What Are You Cutting?
Our cutters are designed for multiple industries, multiple uses.
(800) 218-3068
REDUCE CUT INJURIES • REDUCE DAMAGED GOODS • ALWAYS SAFETY READY
Visit www.kleverinnovations.net for videos of proper use and additional information.
CAUTION: Even though these are Safety products, please understand that blade edges are sharp.
Proudly made in the U.S.A.

Klever KCJ-1 Specifications

General

Brand	Klever
Model	KCJ-1
Category	Cutter
Language	English

Summary

Safety Recommendations

General Safety Instructions

Place non-cutting hand away from cut path, do not modify product, and dispose of worn products.

Handling Caution

Understand that blade edges are sharp and handle with care.

Cutting Boxes

Box Cutting Technique

Align cutter at corner, angle handle slightly, and pull with even force.

Cutter Opening Selection

Select cutter openings based on box material and application for optimal use.

Cutting Tape

Tape Cutting Technique

Align cutter opening with tape edge and pull through to cut.

Tape Splitter Use

Use tape splitter end to reduce residue and prolong blade life by pushing through tape.

Cutting Straps and Banding

Strap Cutting Technique

Align cutter with strap edge and cut at a downward 45° angle.

Metal Banding Limitation

Klever safety cutters are not designed for cutting metal banding.

Cutting Plastic Film and Wrap

Film Cutting Technique

Align cutter with material edge and pull in a straight line with even force.

Pallet Wrap Cutting Method

Start cut from bottom, pull up toward pallet top, keeping material taut.

Cutting Mailing and Box Labels

Label Cutting Technique

Align tip with label edge, press beneath top layer, angle cutter, and pull.

Label Removal Tip

Repeating the cut on all sides allows for clean label removal.

Cutting Packing Slip Envelopes

Envelope Cutting Technique

Align tip with envelope top, apply downward pressure, and pull through plastic.

Envelope Cutting Caution

Be careful not to press too deep to avoid contacting envelope contents.