Active Noise Cancellation Modes (ANC)
Press and hold for 2 seconds the multi function button
of the right earphone to switch between the three ANC
modes. A prompt voice will indicate the current mode
selected.
ANC On: The ANC is turned on to reduce the environment
noise around you and let you focus on your music/call
only.
ANC Off: The ANC is turned off.
Transparency mode: The ANC is turned on, but external
human voices are amplified to allow you to hear people
around you.
LED Indicator status
Earphones LED indicator
Turned on: fixed white.
Pairing: flashing in blue and white alternatively.
Reset: flashing in white, then turns off when the reset is
done.
Case LED indicator
Charging status (earphones): fixed green while charging,
which turn off when fully charged.
Low battery (case): flashing green, which turn off when
the battery is completely discharged.
Charging status (case): flashing white while charging,
fixed white when fully charged.
8
To Next Page
Loading...
