To Next PageTo Next Page
Need help?Do you have a question about the Klimaire KSWM012-C113 and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Phase | 1 |
| Frequency | 60 Hz |
| Type | Mini-Split |
| Cooling Capacity | 12000 BTU |
| Heating Capacity | 12000 BTU |
| Refrigerant Pipe Connection Size | 1/4" and 3/8" |
Essential safety instructions to prevent injury and property damage.
Critical warnings and guidelines for safe and proper unit installation.
Detailed functions and operations of the indoor unit.
Key features and operations of the outdoor unit.
Physical dimensions and specifications for the indoor unit.
Physical dimensions and specifications for the outdoor unit.
Diagram illustrating refrigerant flow during cooling operation.
Diagram showing refrigerant flow for heat pump operation.
Operating temperature ranges for cooling mode.
Operating temperature ranges for heating mode.
Schematic illustrating the internal wiring of the indoor unit.
Schematic illustrating the internal wiring of the outdoor unit.
Torque specs and cable connection guidelines.
Guidelines for pipe length and elevation differences.
Steps for purging air from refrigeration piping and unit.
Procedure for pumping down refrigerant during re-installation.
Procedure for re-purging air after re-installation.
Procedure to balance refrigerant with valves.
Steps for evacuating the refrigeration system.
Procedure for charging the system with refrigerant.
Operating conditions and symbol meanings for controls.
Overview of various operational functions.
Details on the unit's internal protection mechanisms.
Operation mode where only the fan runs.
Operation mode for cooling, fan, and compressor.
Operation mode focused on reducing humidity.
Operation mode for heating, valve, and fan actions.
Operation mode to remove frost from outdoor unit coils.
Automatic mode selection based on temperature.
Function to initiate cooling operation forcefully.
Energy-saving mode for comfortable operation.
Resumes previous settings after power interruption.
Mode for rapid cooling to reach target temperature.
Explanation of indicator lights on the display board.
Table of failure phenomena and indicator states.
Flowchart for diagnosing 'no operation' issues.
Troubleshooting for units that frequently reset.
Diagnosing and resolving indoor fan speed control issues.
Troubleshooting steps for temperature sensor faults.
Diagnosing compressor over current protection trips.
Troubleshooting EEROM error codes.
Troubleshooting issues related to outdoor unit protection.
Resolving communication errors between units.
