To Next PageTo Next PageWhat to do if Klimaire Air Conditioner doesn't work but the LED is on?
If your Klimaire Air Conditioner's LED display is on but the unit isn't working, check the TIMER setting. If the TIMER is set, the air-conditioner will be in a hold condition. Cancel the TIMER setting to return the air-conditioner to normal operation.
How to fix Klimaire KSIA012-H216-O Air Conditioner when the motor runs but it doesn't work?
If you hear the motor running in your Klimaire Air Conditioner but it's not working, ensure the unit is powered on. Press the ON/OFF button on the remote control, making sure the signal is well received by the unit. This should bring it to a working condition.
What causes my Klimaire KSIA012-H216-O Air Conditioner compressor to work discontinuously and the fan to slow down?
The compressor in your Klimaire Air Conditioner might stop intermittently, and the fan motor might slow down in cooling and dehumidifying modes to prevent the indoor heat exchanger from freezing.
Why does Klimaire KSIA012-H216-O compressor work discontinuously in dehumidifying mode?
When your Klimaire Air Conditioner is in dehumidifying mode, the unit will automatically control the compressor's operation based on the inside temperature.
General| Refrigerant | R410A |
|---|---|
| Phase | 1 |
| Type | Mini-Split |
| Cooling Capacity | 12000 BTU |
| Heating Capacity | 12000 BTU |
| Voltage | 208-230V |
Lists error codes and their associated problems for quick reference.
Essential preliminary checks for troubleshooting common AC issues.
Verifies input voltage, AC power connection, and voltage of L7805 (IC2).
Step-by-step troubleshooting guide to diagnose no power issues.
Verifies indoor fan motor connections, voltage, and IC.
Step-by-step guide to diagnose indoor fan motor failure.
Verifies input voltage and outdoor connecting terminal wiring.
Troubleshooting guide for outdoor unit non-operation.
Checks input voltage and step motor connection to Cn2.
Step-by-step procedure to diagnose step motor issues.
Verifies set temperature and indoor PCB connection.
Troubleshooting guide for no hot air blow in heating mode.
Step-by-step troubleshooting for remote control failures.
